Find or Sell any Parts for Your Vehicle in USA

Mace-vcm Otr Cai + 12mm Manifold Insulators To Suit Holden Ve Sidi Lf1 3.0l V6 on 2040-parts.com

AU $690.00
Location:

Melbourne, VIC, Australia

Melbourne, VIC, Australia
Condition:New Brand:MACE Manufacturer Part Number:CAI653

MACE Engineering Group - Official eBay Store

MACE-VCM OTR CAI + 12MM MANIFOLD INSULATORS TO SUIT HOLDEN VE SIDI LF1 3.0L V6 


(Please note this specific SIDI OTR will only suit the LF1 specific VE motor. If you have a LLT, LFX & LFW motor please locate them in the search menu.If you are unsure or need assistance please contact us)


This OTR cold air intake provides a range of benefits as listed below:


  • Increased power & torque
  • Increased air flow
  • Cooler air intake temperatures
  • Increased throttle response
  • Increased fuel economy
  • Great induction sound
  • Stealth under bonnet appearance
  • Manifold Insulators which reduce under bonnet temperatures and increase bottom-end torque (only included with select part numbers)

The factory intake is very limiting, as the engine must draw in air through the 90 degree curved intake pipe, restrictive air box and paper panel filter. The intake is designed in such a way in order to limit noise but unfortunately lowers the volumetric efficiency of the motor.


There is:


  • No tilting back of radiators involved
  • No removing bumper bars or grilles to install CAI or clean filter
  • No cutting of any body panels

The circular LF1 and LLT MAF cartridges will simply slot into the adapter included with the OTR which is pictured below. This adapter relocates the MAF between the throttle body and the OTR. This adapter will NOT suit later model LFX and LFW equipped commodores so please choose carefully (OTR to suit these motors are featured in another ad). If unsure, feel free to contact us.




Kit Contains:


  • OTR CAI
  • K&N Filter
  • OEM Radiator mounting brackets and washers
  • OEM flexible couplings Stainless steel hose clamps
  • OEM style drain valve
  • OEM breather connector
  • PCV Plumbing kit
  • Adapters
  • Mace Manifold Insulator Kit

To ensure successful fitment, the MAF loom will require extending and our manifold insulators will also need to be installed to allow the throttle body to line up with the intake. This is somewhat of a tedious install and unless confident we recommend having it fitted at a professional workshop.


Please contact us, if you require fitment instruction.


Please note :


  • A Dyno tune is mandatory post fitment otherwise a fault code will be thrown and the vehicle may enter limp mode. We have a number of specialized workshops we recommend for Dyno tuning vehicles with these setups.
  • Due to VCMs new design change, the grommet on the back of the OTR must be drilled out and the plastic barb included with the plumbing pack needs to be used as part of the breather setup.
  • If you have an LPG Alloytec V6 (LWR) then please confirm exactly what type of MAF cartridge your vehicle is equipped with prior to making a purchase. 


Intake must be used with the factory MAF cartridge and our Manifold Insulators for perfect fitment.


PART NUMBER - CAI653


Please remember to check out our other performance products for sale


*** You may receive an Address Confirmation email in case our system is unable to verify your delivery address based on our address database ***


E336


For additional support, please refer to the link below


MACE Support -Product Assistance Guide


To submit a formal enquiry about any of our products or services, please click on the link below


MACE Support - Submit an enquiry


DOMESTIC ORDERS


Orders typically take 1-3 business days to prepare and process prior to dispatch. Freight may take 1-10 business days from the date of dispatch to delivery within Australia. No Weekend Deliveries.


To Calculate freight costs simply proceed to the checkout where shipping will be calculated automatically.


**COD (CASH ON DELIVERY) IS ROAD FREIGHTED AND WILL TAKE 3-10 WORKING DAYS FOR DELIVERY FOR MORE INFORMATION ON COD PLEASE CLICK HERE**


INTERNATIONAL ORDERS


When you are checking out an international order, please complete all the necessary information. You must select your region from the delivery method drop down menu, to get the correct shipping costs.


Orders outside of Australia may take up to 4 weeks.


*You will be responsible for any applicable taxes and/or duties and will need to be paid upon delivery*


**Saturday and Sunday IS NOT business days**


We at MACE ENGINEERING are a design company specializing in automotive product development. From a one off custom design right through to mass manufacturing, product we can deliver.


With over 25 years of experience, you can be assured we’ll make it happen for you. In addition to automotive products, we’ve also been involved in the design and manufacture of other items such as steel structures for the manufacturing and movie industries, consumer products, specialized machinery and electronics engineering and all things that help improve the performance of your Holden or Ford.


Copyright 2010 MACE ENGINEERING GROUP


Air Intake Systems for Sale

McLaren P1 production starts in Woking

Tue, 08 Oct 2013

McLaren P1 production starts in Woking The Geneva Motor Show in March saw the arrival of the first production version of the new McLaren P1 (and its arch-rival, the LaFerrari). But it’s taken until now – seven months later – for McLaren to finish final testing of the P1 before pressing the button on their clinical assembly line to start customer P1s rolling out. In between the reveal at Geneva and production starting, McLaren have been having a bash at the Nurburgring (with mixed results) and doing some final hot weather testing on the P1, but now – apart from a few inevitable tweaks once the P1 gets out in to the real world – the P1 is ready for its customers.

Aston Martin opens new Design Center

Mon, 17 Dec 2007

Aston Martin has bought itself an early Christmas present – or rather it has built itself one. The new design studio – the first ever for Aston Martin – was inaugurated last week at a huge gala event presided over by the sports car maker's CEO, Dr. Ulrich Bez.

Aston Martin One-77 (2009): new video and cabin photo

Wed, 12 Nov 2008

By Tim Pollard First Official Pictures 12 November 2008 12:12 Aston Martin today publishes a second video of its uber-exclusive One-77 supercar – and we see the first glimpse inside the £1.2 million car's cabin. Watch the short film on our video player below to see official footage of Aston CEO Dr Ulrich Bez, design boss Marek Reichman and program manager Chris Porritt talking about the One-77. Porritt said the One-77 continued the tradition set by low-volume models like the DB4 GT Zagato – with craftsmanship that just wouldn't be possible on a V8 Vantage or DB9.